Powder Coating & Blasting Across Houston
Powder Coating Services in Houston, TX
Powder coating is a dry finish. Same-day pickup may be available. All our work is guaranteed. Get on the schedule now!
Share your 2 best days and times, and a real person will call you to confirm.
What It Is
Powder coating is a dry finish. Powder is sprayed onto bare metal with an electrostatic charge, then the part goes into an oven where the powder melts and flows into a hard, even coat. Done right, it is thicker and tougher than most liquid paint and holds up to Houston's heat, humidity and sun. We coat wrought iron gates and fences, security bars, railings, patio furniture, trailers, brackets, motorcycle and ATV parts, equipment, signs and architectural and commercial metal. Every job starts with cleaning and blasting to bare metal so the powder bonds to clean steel or aluminum, not to old paint or rust. Bring us the part, or call about delivery — drop-off, pick-up and delivery details are confirmed when the job is booked.
Serving Neighborhoods Across Houston
What's Included
Gates, fences & security bars
Wrought iron gates, fence panels and security bars stripped, blasted and coated in a finish that stands up to Houston weather.
Patio furniture & railings
Outdoor furniture, handrails and metal fixtures refinished in gloss, satin or textured powder that resists fading and chips.
Trailers, brackets & equipment
Trailer frames, brackets, ATV and equipment parts coated for a hard, even finish that takes real use.
Commercial & production runs
Repeat parts and production runs for businesses and contractors, with consistent color and finish across the batch.
Custom color matching
Single-stage and two-stage finishes in gloss, satin, matte, textured, metallic, candy and clear, with color matching.
Why This Matters in Houston
Houston's hot, humid subtropical climate — muggy air most of the year — speeds up rust on bare and chipped steel, so gates, railings and patio furniture need a tough, oven-cured finish. Salt air from Galveston Bay reaches the southeast side, including Clear Lake. Heavy rain, flash flooding along the bayous, and hurricanes and tropical storms — including Hurricane Harvey in 2017 and Hurricane Beryl in 2024 — left many fences and outdoor fixtures rusting. Strong summer sun fades and chalks ordinary paint. Wrought iron gates, fences and security bars are common across the city, and older brick and wood homes in historic neighborhoods like the Heights and the East End add to the work.
Care & Prevention Tips
Rinse powder-coated items with mild soap and water and avoid harsh solvents. Touch up chips before rust creeps under the finish. Rinse salt and grime off coated parts after trips to the coast. These are general tips — the right care depends on the part and the finish.
Is this the right fit?
The right method is decided after we see the item or surface. Some items may not suit a given process — for example thin sheet metal, plastic, glass, rubber or cast parts that may warp, pit or outgas, or items with lead paint that need special handling. Tell us what you have and we will point you to the right process.
Powder Coating Colors & Finishes
A powder coat finish can look glossy and slick, soft and satin, flat matte, rough and textured, or deep and metallic. Candy and clear finishes let a base color show through with depth, and two-stage finishes build a base plus a clear or color coat for candy, metallic and chrome-look results. The finish you pick changes both the look and how the part holds up — textured finishes hide imperfections and grip well, while gloss shows off a smooth, clean part.
Powder Coating Cost & Prices
What drives the cost is the size and number of parts, how much old coating and rust has to come off, the surface, the finish and number of coats, the color choice, masking and any repairs. We do not quote a dollar figure until we see the job, because two gates that look the same can need very different prep. Use the cost calculator for a rough idea, then call for a real quote.
Powder Coating vs Paint
A cured powder coat is thicker and tougher than most liquid paint, resists chips and fading better, and contains no solvents. Paint still makes sense for quick touch-ups or parts that cannot go in an oven. For most outdoor metal, powder coat lasts longer.
Powder Coat Aluminum
Aluminum takes powder coating well once it is cleaned and prepped the right way. The prep differs from steel, and we choose the process for the metal in front of us.
Commercial Powder Coating
We coat repeat parts and production runs for businesses and contractors, with consistent color and finish across the batch.
Single Stage vs Two-Stage
Single stage is one coat of powder with no clear. Two-stage uses a base plus a clear or color coat, used for candy, metallic and chrome-look finishes.
Custom Powder Coating & Color Matching
We can color match in most cases. Tell us the look you want and we will point you to the right finish and process.
A Note on Mobile Powder Coating
Blasting and prep can be done on site, but the powder has to be cured in an oven, so the coating itself is done in the shop. Mobile and on-site work means blasting and prep — not curing at your location.
Pricing Guide
| Job Type | Price | What Affects It |
|---|---|---|
| Gate, fence or railing section | Quoted once we see the job | Size, condition, finish, number of colors |
| Patio furniture set | Quoted once we see the job | Number of pieces, condition, finish |
| Trailer or large item | Quoted once we see the job | Size, how much rust and old coating, finish |
| Commercial production run | Quoted once we see the job | Quantity, color, finish, masking |
Cost depends on size and number of parts, how much old coating and rust must come off, the surface or substrate, the finish and number of coats, color choice, masking, repairs, and travel distance for mobile work.
Why Choose Us for This
Bare-metal prep on every job so the powder bonds to clean metal.
Real color and finish options, with honest advice on what fits the part.
Clear quotes set after we see the item — no surprise add-ons.
Get in Touch
Call now or book in under a minute — a real person will confirm.
What to Expect
- 1
Call or book and tell us what the item is and the finish you want.
- 2
We look at the job and quote it, including any blasting and prep.
- 3
We clean, blast and coat, then cure the powder in the oven.
- 4
You pick up, we deliver, or we arrange on-site prep where it fits.
Frequently Asked Questions
Is powder coating heat resistant?
Powder coating handles normal heat better than most paint, but how much heat a coated part can take depends on the powder, the color and how the part is used. Parts near engines, exhaust or grills need the right powder for the job. We help you pick a finish that fits the heat the part will see.
How long does powder coat last?
A well-prepped, oven-cured powder coat lasts a long time on outdoor metal, but the real life depends on the part, the finish, the sun and weather it sees, and how it is cared for. Rinsing coated items with mild soap and water and touching up chips before rust creeps under the finish helps it last.
Can aluminum be powder coated?
Yes. Aluminum takes powder coating well once it is cleaned and prepped the right way. We coat aluminum parts, railings and furniture often. The prep is a little different from steel, and we choose the process for the metal in front of us.
Can you paint powder coated aluminum?
You can paint over a powder-coated surface, but it needs the right prep and a paint that bonds to the cured powder, or it will peel. In most cases it is better to strip and re-coat. Tell us what the part is and the look you want, and we will point you to the right option.
Our Other Services
Wheel, Rim & Automotive Powder Coating
Wheels, rims, calipers and car parts stripped, blasted and coated in finishes built for the road.
Sandblasting
Dry abrasive blasting that strips paint, rust and old coatings off metal, concrete, stone and wood.
Dustless & Mobile Blasting
On-site wet abrasive blasting that cuts airborne dust for brick, graffiti, pools and large items.
Soda, Media & Glass Bead Blasting
The right media for the job — soda, glass bead, plastic, corn cob and walnut shell for delicate surfaces.
Industrial, Paint Stripping & Rust Removal
Industrial blasting for structural steel, heavy equipment, fleets, tanks and fabricated steel.
Cost Calculator
See how the main factors move the cost of a job.
Get a Quote
Request a Quote
Tell us about the job. No pressure — we will call to confirm.
Or call us at (346) 566-3200.
Get on the Schedule Now
Call now or book in under a minute — a real person will confirm.